股票配资门户歡迎您的到来!

BK-BKW-BKS-GBK-NBK的意義

發布時間:2011.11.10 新聞来源:直縫股票配资门户_大口徑直縫股票配资门户_厚壁股票配资门户_高頻焊接股票配资门户-堆财网 浏覽次數:

网上经常有人問,BK,BKW,BKS,GBK,NBK 是什麼意思,我想看了这個大家應該明白了。

Designation

Symbol

Description

交貨狀态

代号

說明

Cold finished (hard)

BK(+C)

Tubes do not undergo heat treatment following the final cold forming and, thus, have a rather high resistance to deformation

冷加工(硬)

最後冷加工之後不進行熱處理, 從而管子隻可能進行很小的變形.

Cold finished (Soft)

BKW
(+LC)

The final heat treatment is followed by cold drawing involving limited deformation. Appropriate further processing allows a certain degree of cold forming (e.g. bending, expanding)

冷加工(軟)

最後熱處理之後進行小變形量的冷加工, 對股票配资门户再加工時允許有限的冷變形(例如: 彎曲, 擴口)

Cold finished and stress-relieved

BKS(+SR)

Heat treatment is applied following the last cold forming process. Subject to appropriate processing conditions, the increase in the residual stresses involved enables both forming and machining to a certain degree.

冷加工後消除應力退火

最後冷加工後在Acl點以下進行退火, 以消除冷加工應力.

Annealed

GBK(+A)

The last Cold forming process is followed by annealing in a controlled atmosphere.

退火

最後冷加工之後,股票配资门户在保護氣體下進行完全退火.

Normalized

NBK(+N)

The last cold forming process is followed by annealing above the upper transformation point in a controlled atmosphere.

正火

最後冷加工之後,股票配资门户在保護氣體下進行正火.

 

 

 

 

 

 

 

 

 

上一篇:直縫股票配资门户架子管

本文共分 1